SUNRISE ENGINEERING & MANUFACTURING

Our Production

We provide a complete range of Gulf hammer union connections
for quick makeup and breakout in your flowline.

Sunrise offers a comprehensive range of standard and sour gas Hammer Unions. Each union is thoroughly inspected to ensure long, dependable service in the most extreme conditions. Available in stock at our distribution center in Sharjah, UAE.

A full range of API line pipe is available from Fig. 100 (1000 psi) to Fig. 1502 (15,000 psi). Threads are gauged with calibrated API gauges which are checked regularly with API master gauges. Non-pressure seal thread (NPST) connections are also available upon request.

  • Three lug nuts and self-locking ACME threads provide quick make-up and break-out
  • Color coded for quick identification
  • Unique identification for sour gas unions
  • Meet or exceed National Association of Corrosion Engineers standard NACE MR-01-75 and API RP-14E
  • Manufactured from quality steel meeting ASTM and/or AISI standards
  • The spherical surface male sub and angular surface female sub form a metal-to-metal seal, the ball and tangent provides a perfect seal
  • Range from 1” to 12” with cold working pressures from 1000 to 22,500 PSI
  • Fully interchangeable with most major brands of Hammer Unions

Highlights of Gulf Hammer Unions

  • Universally interchangeable
  • Slim and light weight
  • Aesthetically better than other manufacturers
  • Cost effective

We offer butt weld hammer unions across all figure numbers—from Figure 100 (1000 psi) to Figure 1502 (15000 psi)—and are ready to fabricate into your pipework assembly. Gulf butt weld hammer unions are available in standard service or sour gas trim.

 

  • Three lug nuts and self-locking ACME threads provide quick make-up and break-out
  • Color coded for quick identification
  • Unique identification for sour gas unions
  • Meet or exceed National Association of Corrosion Engineers standard NACE MR-01-75 and API RP-14E
  • Manufactured from quality steel meeting ASTM and/or AISI standards
  • The spherical surface male sub and angular surface female sub form a metal-to-metal seal, the ball and tangent provides a perfect seal
  • Range from 1” to 12” with cold working pressures from 1000 to 22,500 PSI
  • Fully interchangeable with most major brands of Hammer Unions

 

Highlights of Gulf Hammer Unions

  • Universally interchangeable
  • Slim and light weight
  • Aesthetically better than other manufacturers
  • Cost effective

 

Sunrise the sole manufacturers of Plastic Thread Protector (HDPE) in the Middle East.
OUR GHU Protectors are used to protect ACME Threading of Oilfield Equipment’s.

GHU MSI’s Pipe Protection Technologies provides the ultimate protection for your premium threads. Each protector is computer numerical controlled (CNC)-machined for an exact fit and carefully programmed to reach the greatest level of precision, reducing the chance of corrosion and eliminating any disconnection of the protector during storage or handling. Offering enhanced impact strength, GHU thread protectors are formulated from proprietary all-plastic resins and can be tailored to your specific thread connection needs. This flexibility makes it an ideal thread protection solution for most premium thread connections on the market today.

 

Features and Benefits

  • Designed for premium threads
  • CNC-cut threads for precision fit
  • Closed-end, non-liftable, and liftable designs for easy handling
  • Manufactured according to API 5CT, Annex-I, 10th edition specification
  • Suitable for all types of handling or loading, including truck, rail, and offshore transport
  • Designed for extreme weather conditions; tested from -50° to 150°F (-46° to 66°C)
  • Available in all sizes and figures to match costumer needs.
  • Fully plastic
  • 100% recyclable

1,000 15,000 psi cold working pressure

1,500, 22,500 psi test working pressure

Sizes Available 1, 1½, 2, 4 (Inches)

CRIMP END BY HOSE BARB FOR R13 HOSE INTERGRAL STYLE ( NO WELD) integral hose connection ends for male x female subs of hammer union 100% interchangeable with weco, fmc, and all other brands of union ends, they are one piece for use with crimp machines and are integral with no weld, hose barb union male sub and nut, and female threaded half. both are fully integral one piece fittings with no welds and are supplied with retaining ring and segment ring for the nut to easily slide on and off.

These fittings are ideal for rig up were no welds are allowed on hose ends.

GHU Integral Fittings are cementing and fracturing equipment High Pressure Fluid Control Products. Widely used in the acidic operating environment (excluding containing CO2, H2S sour gas operating environment) in the high-pressure discharge line, input line, a temporary flow line, well testing, and other high-voltage transmission lines on pipelines

There are high-voltage connector specification 2in ~ 4in, rated working pressure 42MPa ~ 105MPa, working temperature -46 ℃ ~ 121 ℃.

Integral Fittings technical parameters and performance specifications are in line with API 6A. Its product specification level PLS3, performance levels for the PR2, it can work with SPM’s similar products interchangeable.

⑴. High pressure integral fittings can connect with all kinds of crushing and cementing equipment at spot;

⑵. Integral manifold joint includes long sweep elbow, right angle elbow, Tee, Y-tee, manifold Tee, cross tee, manifold cross, integral fittings with specifications of 2’’, 3’’ and cold working pressure 42MPa~105MPa(6000Psi~15000Psi).

Features

  • Integral construction from closed-die forged high quality alloy steel, optimized for weight and erosion resistance
  • Individual serial number on all
  • Crosses, Tees, Cushion Ells (Target tees)

Options

  • Standard or Sour (NACE) service
  • Custom paint and branding
  • Variety of dimensions to match different OEM fitting patterns
  • Crosses are available as solid (no tap), or with NPT or Autoclave taps

 

 

 

Gulf Adapter Flanges are available in all sizes and pressures rating both in standard as well as sour gas service (flange X union end)

  • GHU maintains overall height and customer specified special thickness, consistent with design consideration.
  • The flange adapter or Union Flange is used for oilwell drilling andtesting, it is very common accessories for piping connection.
  • The flange adapter manufactured by GHU are integral forged, fully
    heat treated,and plastic thread protectors will be provided on union
    half for thread protection.

Sunrise Manufacture Crossovers from high strength alloy steel, and are available in MxF, MxM, FxF, and M( or F) x LPT configurations.

Sunrise crossovers come in a broad range of configurations and sizes from 1″ Fig 100 to8   “Fig 1502, suitable for pressure ratings up to 15,000 psi NSCWP. Available for standard and sour service.

Sunrise Flow Line Equipment Crossovers are 7″ (overall length) but can be specially made to any length. Our expertise can manufacture any configuration to suite the customer’s requirement.

 

 

Sunrise manufactures Pup joints from a high quality alloy steel seamless pipelines with forged upset ends, heat treated, one end of pup joints is machined ACME thread, and another end is installed with detachable wing nut, All pup joints are 100% hydraulic pressure tested.

We manufacture pup joints in all sizes, grades, and thread profiles to meet any requirement. Our tubing pup joints are manufactured out of seamless tubing and machined or upset to final dimensions. All API casing and tubing pup joints are manufactured according to API Spec 5CT. Special requirements are available on request.

 

  • As per customer request we manufacture pup joint size varying from1 feet to 3 feet integral type
  • We are specialized in manufacturing Welded as well as NPS type pup joint of different lengths and sizes

 

Sunrise designs and manufactures a range of Gulf Swivel ring flanges in any size and pressure rating to meet applicable dimensions and gasket types of any recognized specification.

  • The Swivel Flanges permits 360° rotation of an outer ring around a hub to allow easy alignment of bolt holes while attaching to a mating standard flange. For subsea applications, this capability is important when only a single diver is available to align and make up the flange connection.
  • Swivel flanges are used mainly for installations where the connecting tubular product is already installed and the user needs to be able to swivel the bolting ring to match up to the next flange product.

Gulf Hammer Union Blanks can be used as environmental caps for transported flow-line or as full pressure containing system bull plugs.

  • Union blinds can be dilled through and tapped in order to fit nominal NPT guage port or auto clave connectors for testing purpose or drilledblinds supplied with bolt and galvanized chain for tethering the capblind to the mating union outlet. Every ghu male bull or guage plug issupplied with a ring to permit the blank and nut assembly to be handledas a single unit, avoiding the potential for mismatch at service time.
  • Sizes Available 1, 2, 3, 4, 6, 8 (inches)

Based on years of experience and research on customer needs in the oil/gas industry, Sunrise has successfully developed flowline products suitable for both standard and sour services.

. We supply the world’s leading manufacturer’s flowline products to the oilfield customers including Threaded Hammer Union, Butt Weld Hammer Union, Special Hammer Union, Changeover Crossovers Adapters, Integral Blind Subs, Flange Adapter, Pup Joint, Thread Protector, Hose Connector Union, Swivel Ring Flange, Integral Fittings Oilfield, Seal Ring, and O-Ring, Retainer Ringsnap Ring – Snap Ring, Retainer Segment.